Camozzi J4CPG1806 Seat shut-off valve

Pneumatic seated shut-off valve Omal with a single-acting actuator, normally closed NC, with flow above the seat, connection: G1 ”, pneumatic actuator diameter: 63 mm, nominal bore: 25 mm, medium temperature: – 10 ° … + 180 ° C, operating pressure: 0 … 25 bar, seal material: PTFE, body material: stainless steel AISI316 (mod. ARES). For aggressive environments.

GENERAL CHARACTERISTICS

Working environment: air, water, steam, alcohols, oils, petroleum products, gasoline, etc.
Working pressure: from 0 to 16/25 bar (steam up to + 180 ° C, 0 … 10 bar)
Medium operating temperature: -10 ° to + 180 ° C
Ambient temperature: -10 ° to + 60 ° C for standard PA66 polyamide actuator housing
Maximum viscosity: 600 cSt (mm2 / s)
Connection to the pipe: threaded, flanged, for welding according to ISO 228/1 (GOST 6357-81), ISO 7/1 (GOST 6211-81)
Installation on a pipeline: in any spatial position
Size: 1 “single-acting (N.C.) actuator with flow over valve
Materials: Mod. ARES – stainless steel valve become
Working medium: compressed air, gas or neutral medium
Vacuum tightness: 97.4%

+38 097 834 45 12

Categories: ,

Pneumatic seated shut-off valve Omal with a single-acting actuator, normally closed NC, with flow above the seat, connection: G1 ”, pneumatic actuator diameter: 63 mm, nominal bore: 25 mm, medium temperature: – 10 ° … + 180 ° C, operating pressure: 0 … 25 bar, seal material: PTFE, body material: stainless steel AISI316 (mod. ARES). For aggressive environments.

• Design: with tilting spindle and single-acting pneumatic actuator

• Valve type: N.C., with flow above the seat

• Connection: internal thread G1 ”

• Nominal bore DN: 25 mm

• Working pressure: 0 … 25 bar

• Working ambient temperature: -10 ° … + 180 ° С

• Ambient temperature: -10 ° … + 60 ° С

• Pneumatic drive diameter: Ø 63 mm

• Pilot pressure: 1.8 … 10 bar

• Nominal flow Kv: 20 m³ / h

• Control port: female thread G1 / 8 ”

• Seal material: PTFE

• Case: stainless steel AISI316

• Stem: stainless steel AISI316L

• Plunger: stainless steel AISI316L

• Pneumatic drive: polyamide PA66 + GF30%

• Working environment – aggressive: alcohols, oils, gases, gasoline, oil products, etc.

• Installation: in any position

• Valve weight: 1.6 kg

• Optionally available NAMUR plate for connecting control valve and pneumatic actuator Ø 50 – 110 mm

• Plate marking for ordering: KBNJ0001_R

• Pneumatic actuators are available in five different diameters: 40, 50, 63, 90, 110 mm. They can be rotated 360 ° for easy air supply.

Related products